How old is your water heater? Read the serial number

You can tell how old a water heater is from the serial number on its label. On most brands, the first 2 to 4 characters give the month and the year it was made. Rheem, A. O. Smith and Bradford White each write that date a different way, so this piece walks through each code and what to do once you know the date.

A two-story stucco house and a small backyard guesthouse on a lawn

The short version

  • The serial number on the label at the front of the tank usually starts with the month and year the heater was made.
  • On a Rheem, the first 4 digits are the month and then the year, so a serial number that starts 1209 means December 2009.
  • On a current A. O. Smith the first 4 digits are the year and then the week, while a Bradford White starts with 2 letters for the year and the month.
  • Write the date on the tank, because the Department of Energy says most tank water heaters last 10 to 15 years.

Time: 15 minutes.

How to find the date, step by step

  1. Find the label. It's a sticker or a metal plate with the brand, the model number and the serial number on it. Bradford White calls it the rating plate. Rheem says the label is on the front of a tank water heater. On a tankless heater, it's on the front or the right side, depending on the model.

  2. Read it without taking anything apart. The label is on the outside of the heater. If the tank is in a tight closet or the label faces the wall, hold your phone behind the tank and take a photo with the flash on.

  3. Pick out the serial number. The model number is on the same label, so check which line is which. Copy the whole serial number, letters included, or keep the photo. The City of Palo Alto's utility asks its customers to write down both numbers.

  4. Match the brand to its code. The brand name is on the label too. Use the table below, then the section for your brand.

  5. Check that the year makes sense. Bradford White's letters repeat every 20 years, so one letter can mean 2 different years. Palo Alto says to check the year against what you know about the heater's install.

  6. Write the date on the tank. Palo Alto's utility mails its customers a sticker for this. Masking tape and a marker work too.

Tick each step as you go. of 6 done.

Here's how each code reads, using each source's own example:

Brand Where the date is Example Made in
Rheem First 4 digits: month, then year 1209D01234 December 2009
A. O. Smith (current) First 4 digits: year, then week 203707002601001 Week 37 of 2020
A. O. Smith (before 2008) Second character is the month letter, then 2 digits for the year 2C062938405 March 2006
Bradford White First letter is the year, second letter is the month HK16433183 October 2011

How to read a Rheem serial number

Rheem says the serial number on its water heater labels is 10 characters long. Rheem's own example is 1209D01234. The first 2 digits are the month it was made. The next 2 are the year. After those come a letter for the plant line and the heater's number in the production run.

That means 1209D01234 was made in December 2009. Palo Alto's utility reads the same example the same way.

How to read an A. O. Smith serial number

A. O. Smith has used 2 codes, so check which one yours matches.

On a current A. O. Smith, the first 4 digits are the year and then the week it was made. Palo Alto's example is 203707002601001. It starts with 20 and then 37, so the heater was made in week 37 of 2020, which is early September.

A. O. Smith's Canadian site describes the same code. It says to ignore any letter at the start of the serial number and read the first 4 numbers. The first 2 are the year. For a heater built after 2008, the next 2 are the week.

Heaters made before 2008 use a month letter. Palo Alto says the second character of the serial number is the month, with A for January and B for February, skipping the letter I. The 2 digits after that letter are the year. So 2C062938405 was made in March 2006.

Here are the month letters with I skipped:

  • A is January, B is February, C is March and D is April.
  • E is May, F is June, G is July and H is August.
  • J is September, K is October, L is November and M is December.

How to read a Bradford White serial number

Bradford White says the first 2 characters of the serial number are the year and the month it was made. Both are letters. The month letters are the same as A. O. Smith's older code, A for January through M for December, with no I.

The year letter is the tricky part. Bradford White's chart gives every letter 2 possible years, 20 years apart:

Letter Year
A, B, C 2004 or 2024, 2005 or 2025, 2006 or 2026
D, E, F, G 2007 or 2027, 2008 or 2028, 2009 or 2029, 2010 or 2030
H, J, K, L, M 2011 or 2031, 2012 or 2032, 2013 or 2033, 2014 or 2034, 2015 or 2035
N, P, S, T 2016 or 2036, 2017 or 2037, 2018 or 2038, 2019 or 2039
W, X, Y, Z 2020 or 2040, 2021 or 2041, 2022 or 2042, 2023 or 2043

The chart doesn't use I, O, Q, R, U or V for the year.

Palo Alto's example is HK16433183. H is 2011 or 2031, but 2031 hasn't happened yet. K is October. So the heater was made in October 2011.

For the letters D through Z, the later year hasn't happened yet either, so the earlier year is the one to use. Palo Alto says the letters repeat every 20 years, which means a very old heater could be from 20 years before the chart's first year.

The letters A, B and C are harder, because both years have already happened. A heater stamped A could be from 2004 or from 2024. Ask yourself when you moved in and whether anyone replaced the heater since then. A heater from 2004 would be 22 years old in 2026, past the 10 to 15 years the Department of Energy says most tank heaters last.

Ruud and other brands

Ruud has an age calculator on its own site. You enter the serial number. The calculator tells you when the heater was made.

For any other brand, Palo Alto's utility says to check the manufacturer's website. Keep the photo of the label handy when you do. Rheem asks for the serial number to verify a warranty. Bradford White's page has a box to enter it.

What the date tells you

The serial number tells you when the heater was made rather than when it went in. Your heater was installed on that date or later, so the date gives you its oldest possible age.

Compare that age with what the Department of Energy says in its Energy Saver guide. Most tank water heaters last 10 to 15 years. A tankless heater can last more than 20.

Here's what we'd do with the number:

  • Under 10 years old: write the date on the tank and keep up with maintenance, starting with flushing the tank.
  • Gas and 10 years or older: start planning a replacement. Palo Alto says a gas water heater more than 10 years old may need replacing.
  • Past 15 years for a tank: it has outlasted the range the Department of Energy gives, so plan for the replacement now. Learn the warning signs that a water heater is going out in the meantime.

What to do once you know the date

Plan the replacement while the old one still works. Palo Alto recommends switching before the heater fails, so you don't end up without hot water. A planned swap gives you time to compare models and get bids rather than taking whatever's in stock that day.

Think about what a failure does to your insurance. A tank that gives out can flood the closet or the garage. If you file a claim for it, that's a water loss on your record. Casa asks about past water damage when it quotes a California home with standard and specialty insurers. Its form then asks where the water came from. One of the answers is "An appliance, like a washer or water heater." The guide to why insurers turn a home down from Casa, whose team runs this site, says water losses count for more than most homeowners expect. That's one more reason to plan the swap before the tank fails.

Check the Bay Area rule if you live there. The Bay Area Air Quality Management District's Rule 9-6 covers natural gas water heaters. On November 4, 2026, the Air District's board moved the zero-NOx compliance date for residential water heaters to January 1, 2028. NOx means nitrogen oxides, the pollutant the rule limits.

The Air District says the rule applies only when a water heater is replaced. It doesn't require you to replace one that works. The board also set exemptions for qualifying low-income owners and for homes with significant electrical or space limits. If your gas heater is getting old and you're in the district, read the Air District's page before you shop.

Search for recalls. The U.S. Consumer Product Safety Commission has a searchable list of recalls. Search your brand and compare any water heater notice with the model and serial number on your label.

Check the straps while you're there. California Health and Safety Code section 19211 says residential water heaters have to be braced, anchored or strapped against earthquakes. If yours isn't strapped, here's how to strap a water heater for earthquakes. While you're in the garage or the closet, it's a good moment to find your main water shutoff valve too.

Questions people ask

Where is the serial number on a water heater? It's on the label with the brand and the model number. Rheem says that label is on the front of a tank heater. On a tankless one, it's on the front or the right side.

Does the serial number show when the water heater was installed? No. It shows when the heater was made. The heater went in on that date or later.

How do I tell if a Bradford White heater stamped A is from 2004 or 2024? Check it against what you know about the house, such as when you moved in and whether the heater was replaced since. Bradford White's letters repeat every 20 years, so the letter alone can't tell you.

How long does a water heater last? The Department of Energy says most tank water heaters last 10 to 15 years. It says tankless heaters can last more than 20 years.

My brand isn't covered here. What do I do? Palo Alto's utility says to check the manufacturer's website. Have the serial number ready, because Ruud's age calculator asks for it and so do the Rheem and Bradford White warranty lookups.

Sources

Keep reading

More from House